CHECKLIST OF Castle Playhouse

Thoroughly review the legend on the left. We will use the legend in further steps of this instruction.

Step 1

Assembling the Wooden Planks:

1. Locate Side Plank #1 (A). After attaching Base Plank #2, place another Side Plank #3 (B) on top and secure it with Screw #4.

2. Once fully assembled, attach Wooden Plank #5 on top and tighten with Screw #6.

Step 2

Installation of the Slide

1. Assemble slide #7 with side panel #8, and secure them using screw #3.

2. Attach side panel #1 to step panel #9, secure them with screw #6, and then position the slide on top.

Step 3

Assembling the Main Structure

1.Locate Two Curved Bases #10: Place the assembled wooden panels onto the curved bases #10 and secure them using screw #11. Afterward, attach surround frame #12. Be sure to pay attention to the numbers on the frames. Repeat this process for the other half and combine it with the slide.

2. Assemble Top Beams #13: Connect the four top beams #13 and tighten them with screws, then fit the support rod #14. Position the circular disc #15 on top, ensuring it connects to fastener #16. Lastly, flip it upside down and secure everything with screw #11, placing it on the newly assembled base and hanging a curtain.

3. **Final Assembly:** Attach the suction cup to the frame, hang the fabric on top, and then place the capstone. Position the curtain well, and the installation is complete.

Still Need Assistance?

Our knowledgeable and friendly representatives are here to assist you with any questions or concerns you may have. We understand that some problems may require a more personalized approach, and we are committed to ensuring your satisfaction.