CHECKLIST OF CIRCLECUSHION TREE SWING
Thoroughly review the legend. We will use the legend in further steps of this instruction.
| Description | Qty | |
|---|---|---|
| ① | Saucer-Style Fabric Seat | 1 |
| ② | Foam Padded Steel Tubes | 4 |
| ③ | Adjustable Ropes(with 4 eye bolts) | 2 |
| ④ | Locking Carabiners | 2 |
| ⑤ | Hanging Straps | 2 |
| ⑥ | Hardware Kit(nuts, metal washers, and socket wrench) | 1 |
Ready, Set, Play!
Setting up your CircleCushion Tree Swing is a total breeze—just follow these fuss-free steps.
Step 1
Spread out the ①Swing Fabric and peel open the four Velcro ports.
Step 2
Slide the four ②Foam Padded Steel Tubes into the ①Fabric's connectors, ensuring the smaller end goes in first.
Step 3
Connect each pair of ②Tubes snugly until you form a complete ring, then cover the connections with the fabric.
Step 4
Insert the ③Adjustable Ropes (with the Expansion Screw end) into the rin. Place a metal washer on the bottom, secure it with a nut, and tighten with a socket wrench. Don't forget to seal the Velcro!
Step 5
Wrap the ⑤Hanging Straps around a tree or stand, clip the rope to the strap with the ④Locking Carabiners, tighten the lock — done!
Height Adjustment
Slide the rope buckles up or down to set the length. Keep both sides even for a level, comfy swing.
Great job—your CircleCushion Tree Swing is all set up and ready to go. Now let’s kick off the fun!
Still Need Assistance?
Our knowledgeable and friendly representatives are here to assist you with any questions or concerns you may have. We understand that some problems may require a more personalized approach, and we are committed to ensuring your satisfaction.
