How to Assemble
Follow these simple steps, it will take less than 5 minutes.
Step 1
Gently lift both upright poles until they’re fully extended.
Step 2
Keep opening the poles until you hear that satisfying “click” (just don’t swing past 90°!). Then slide the fabric sleeve up to the top.
Step 3
Align their buckles so the scale marks line up perfectly.
Step 4
Twist the lower knob to secure the bottom joint, then repeat on top.
Step 5
Your double-wide fence is locked and loaded!
Step 6
Continue connecting the remaining panels in the sequence shown above until you have assembled four complete fence sections.
Step 10
Align two adjacent fence sections and engage their coupling joints to lock them together.
Step 12
Bring all four assembled sections into position and fasten each corner joint to complete the enclosed playpen.
Step 13
Slip the padded safety strip down each
Step 14
Peel off the adhesive liner and press the strip firmly in place.
Step 15
Sew the other gaps in the same way.
All done! You now have a sleek, durable, and safe pet enclosure that’s as fun to build as it is to use. Enjoy!
How to disassemble
Step 1
Press the small top button on one end of the fence.
Step 2
Slide the locking tab back.
Step 3
Lift the opposite end straight up—and voilà! That section pops free.
Step 4
Repeat these three steps across each connected panel to break the fence down into separate pieces, then stack them flat for storage.
Single-Panel Disassembly
Step 1
Unlock the top-rail brackets on both sides by pushing them outward, as shown.
Step 2
Fold the mesh panel down toward the base—this clears the top latches so the uprights can shift freely.
Step 3
Press the release button at the bottom of each upright and pull the rod up to disengage it.
Step 4
The panel now folds completely flat—easy to stow or transport!
