We know it can be hard.
Baby playpens are complex structures that requires special attention to the sequence of steps. Therefore, we've created this guide for parents to properly assemble your baby playpen. Should you have any question regarding to any step below, feel free to contact our customer service.
CHECKLIST OF Adaptive Space PLAYPEN
The legend on the left side represents the list of fence components you will receive upon delivery. First, carefully check that all fence parts are complete, and arrange them according to the legend for correct retrieval during assembly.
How to Assemble
Step 1
Connecting the Pipes
Using the provided accessories, assemble the four upper horizontal pipes and four lower horizontal pipes as shown in the diagram on the right. This will result in eight long pipes in total:
- Two ABA
- Two EBE
- Two CDC
- Two SDS
Step 2
Building the Frame
①Install Lower Horizontal PipesUnfold the fabric sleeve as illustrated and install the lower horizontal pipes.Insert the two EBE pipes into the long sides of the orange fabric sleeve.Insert the two SDS pipes into the short sides.
②Install the Lifting Tube
Connect each of the four uprights to the EBE and SDS pipes.You will hear a clicking sound when the upright locks into place.
③. Install Upper Horizontal Pipes
Insert the ABA and CDC pipes into the green sections of the fabric sleeve as shown.Ensure that the metal clips with beveled edges on both sides of each horizontal pipe are installed with the beveled edge facing upwards.
Step 3
Installing the Lifting tube
①Insert the Lifting tube into the designated position as illustrated.
②Insert the Lifting tube through the indicated position and direction.
③Push the button downward, then push the lift rod into the slot and release the button.
④Repeat the above steps to install all eight Lifting tube sequentially.
Congratulations, your fence installation is complete!
Additional Instruction
Step 4
How to Use the Lift Gate
Using two fingers, pinch the internal and external switches and push them in the opposite direction of the uprights.Repeat the same method on the opposite side of the horizontal bar to lower the fence gate.To raise the lift gate, lift it until you hear the clips at both ends click into place, indicating it is securely locked.
