Baby Cry Monitor User Manual

Step 1

Connect to Power

Use any USB Type-C charger, such as your phone charger or a portable battery/power bank, to power the device.

Step 2

Wait for Wi-Fi Initialization

The device will blink with 1-second intervals, signaling Wi-Fi setup in progress.

Step 3

Configure in the App

Once the light stays on, open the HappyGira app, go to My Account, and enable push notifications on your iPhone. Then, tap the button to send your Wi-Fi credentials to the baby monitor.

Step 4

Confirmation

After the credentials are sent, the light will blink in 1-second intervals again. If the light turns off, the monitor is ready and listening for your baby. If the light fast-blinks and then stays on, the Wi-Fi setup failed—double-check your credentials and make sure the Wi-Fi signal is strong. Try step 3 again.

Step 5

You’re All Set

Your baby cry monitor is now active and ready to use!

Still Need Assistance?

Our knowledgeable and friendly representatives are here to assist you with any questions or concerns you may have. We understand that some problems may require a more personalized approach, and we are committed to ensuring your satisfaction.