Timber Playpen
Step 1
Get To Know the Legend
Thoroughly review the legend on the left. We will use the legend in further steps of this instruction.
Step 2
Assemble the Structure
Connect pieces A and C to pole B to form a column, and the column as shown in the diagram should be inserted with boards including the door panel. Please pay attention to the direction of the connection pieces and be sure to install them on the front and back as shown in the diagram.
Step 3
Tighten Up
Screw screw D and hollow screw tube together as shown in the diagram, making sure to place two flower screws at ends of the fence. The flower screws can be twisted off without the need for tools for easy storage. Finally, depending on your needs, attach double-sided tape/suction cups to pieces C at the bottom.
Step 4
Lock & Unlock
The folding position has a lock. When the indicator is in the ON position, the joint can be folded; when the indicator is in the OFF position, the joint will be locked. Simply use a coin to insert into the groove, press down and twist to adjust the switch. If the button does not automatically bounce back when switched from on to off, try opening and closing the joint, and the button will automatically pop out.
Step 5
Customize Your Playpen
We have a whole bunch of sizes to choose from, and the quantity of parts varies depending on the size. You can mix and match them to fit your needs just right!
Still Need Assistance?
Our knowledgeable and friendly representatives are here to assist you with any questions or concerns you may have. We understand that some problems may require a more personalized approach, and we are committed to ensuring your satisfaction.
