CHECKLIST OF GLIDE&PLAY BASSINET
Thoroughly review the legend. We will use the legend in further steps of this instruction.
| Description | Qty | |
|---|---|---|
| ① | Adjustable Side Arm | 2 |
| ② | Wheeled Side Frame | 2 |
| ③ | Front Support Bar | 1 |
| ④ | Rear Support Bar | 1 |
| ⑤ | Bassinet Fabric Body | 1 |
| ⑥ | Top U-Tube | 1 |
| ⑦ | Bottom U-Tube | 1 |
| ⑧ | Top U-Tube | 1 |
| ⑨ | Top Lift Bar | 1 |
| ⑩ | Mesh Canopy (Mosquito Net) | 1 |
| ⑪ | Plush Mattress Pad | 1 |
| ⑫ | Toy Hanger | 1 |
Ready, Set, Play!
Setting up your Glide&Play Bassinet is a total breeze-just follow these fuss-free steps.
Step 1
Snap the two ② to the ③ until you hear a click and the round button pops out.
Step 2
Lock the ④ onto the lower mounts of the ②.
Step 3
Insert the ① into the tops of the ②, make sure they’re fully seated.
Step 4
With the ⑤ upside down, slide a ⑧ into each ⑤ and snap to the Tube’s built‑in top bar (click).
Step 5
Lift the ⑤’s built‑in bottom bar and snap it to both ⑧ (click).
Step 6
Feed the ⑦ into the fabric, raise it, snap to the ⑧, then zip the fabric closed.
Step 7
Flip the basket upright. Pass the ⑨ through the lift-door opening, connect to both sides, and zip it up.
Step 8
Set the basket on the base and press down until it clicks. Add the ⑪, clip on the ⑩, hang the ⑫—done and nap‑ready!
Multiple height adjustment
Work with both hands, press the button inward with one hand, and adjust it with the other hand. The component can adjust the required gear height up or down.
swing function
a: In static sleep (no rocking) state: Press the button down to lock tne basket from swinging freely.
b: Before you need to swing the basket, please be sure to press this button to change to unlock state.
Bluetooth Connection
The Bluetooth recognition is called Bluetooth, and when the phone is connected, a ding dong prompt tone indicates that the pairing is successful, and then you can play music or other operations. The switch between the host and Bluetsoth device Music playback can be switched through the sluetooth aperation button (Blue/Music) of the remote controller.
Contral Module
A: Press the power switch to turn on the function module.
B: Left and right swing function button,5 Angle to choose, LED light indicates the choice.
C: Press the Music button to enable the music function. Loop the built-in music, you can also select your
favorite music by pressing the button.
D: Turn on the volume control switch to turn off or adjust the music volume.
E: Press this button to set the timing to 15, 30, and 45 minutes in turn. If you do not select the timing setting, the swing and/or music feature will be turned off automatically with 60 minutes by default.
switch to game bed mode
Zip, flip, tuck — and voilà! Unzip the bassinet cover at the bottom, unfold the hidden second layer, slide the mattress to the base, and you’ve got an instant baby play-safe house for tiny explorers.
Great job-your Glide&Play Bassinet is all set up aInd ready to go. Now let's kick off the fun!
Still Need Assistance?
Our knowledgeable and friendly representatives are here to assist you with any questions or concerns you may have. We understand that some problems may require a more personalized approach, and we are committed to ensuring your satisfaction.
