CHECKLIST OF ALL-AGES KIDS SEAT
Here’s a All-Ages Kids Seat. Thoroughly review the legend. What’s in the box:
| Description | Qty | |
|---|---|---|
| ① | Chair Legs | 2 |
| ② | Seat Panel | 1 |
| ③ | Footrest Panel | 1 |
| ④ | Backrest Panels | 2 | ⑤ | Lower Crossbar | 1 |
| ⑥ | Support Rods | 2 |
| ⑦ | Hardware Kit | 10 screws, 7 metal plates, 1 wooden dowel, 1 hex key |
Ready, Set, Play!
Setting up the Kids Seat is a total breeze—just follow these fuss-free steps. Let the fun begin!
Step 1
Slide a metal plate into each ④ slot. Align ④ into the top groove of a ①. Insert a screw through the round hole on the outside and snug it up (don’t crank it tight yet—cordial slack helps later!). Repeat for the opposite leg and backrest.
Step 2
Pop a metal plate into the ⑤’s groove and hold it in place. Push in the wooden dowel through the first hole on the ⑤ side and into the leg’s matching hole. Secure with a screw—snug but not fully locked.
Step 3
Repeat Steps 1–2 for the other side. Now you’ve got a basic A-frame.
Step 4
Stand the seat upright. Slot each ⑥ the round holes on the ①. Screw them in—still keep it a bit loose for final tweaks.
Step 5
Slide the ② into your chosen height groove. Do the same for the ③.
Step 6
Now that everything’s aligned, fully tighten the ④ screws in this order: top-left, bottom-right, top-right, bottom-left—to keep it from wobbly-wobble. Finish by locking down the ⑥. You’re done!
Pro Tip
Classic vs. Splayed styles use identical steps; only the bottom crossbar lands slightly differently.
Height Adjustments
Loosen (but don’t remove) the screws for one side’s seat, footrest, and crossbar.
Slide the seat to the new groove, then re-tighten the screws. Voilà—custom comfort for every age!
Meet your All-Ages Kids Seat Accessory Squad: safety rails, snack trays, cozy cushions, and more! Scroll down to see how to snap ’em in and unleash your seat’s hidden superpowers.
Baby Set & Harness
①The cushion comes in two slices—top and bottom.Peel the velcro “sticker” off the top half, wrap it around the backrest, wrap it ‘round the backrest like a snug burrito, and press it closed.
②Slide the bottom half on over the seat—kinda like slipping into your favorite socks, open side forward—done!
①
“Snack Attack” (Tray)
Snap it on with one click. Just double-check you grabbed the right size, snack master!
“Tiny Dreamer” (Newborn Set)
Flip the switch on the back, hook it onto the chair’s backrest, and voilà—you’ve got angle control your little night owl will love.
Seat Caster Wheels
①Thread one wheel onto each end of the metal rod—just screw ’em on until snug.
②Make sure the rod’s groove faces inward, pop it into the chair leg, then pop the sliding block over——in the picture-perfect spot. Drop a washer on the bolt, spin it into the block a few turns (don’t go Hulk-tight yet!).
③After all four blocks are in place, nudge each wheel so its edge gently kisses the chair leg, then give every screw a final crank. Wheels on—cha-ching!
Anti-Tip Toes
Flip the chair upside down, align each foot sleeve with its leg, and push in until it “clicks”—no more accidental tip-overs.
Storage Box
One quick snap under the backrest and voilà—extra storage for bibs, burp cloths, or that rogue pacifier.
Usage Tips
1. No soaking or hosing it down.
2. If it gets messy, just grab a damp cloth, give it a quick wipe, then blot dry with a paper towel. Easy peasy!
Great job—your All-Ages Kids Seat is all set up and ready to go. Now let’s kick off the fun!
Still Need Assistance?
Our knowledgeable and friendly representatives are here to assist you with any questions or concerns you may have. We understand that some problems may require a more personalized approach, and we are committed to ensuring your satisfaction.
